Proportional Swivel Headlight and Foglight Mechanism

Prit Devendrakumar Shah; Ajay Patel; Manan Desai

doi:10.21467/ajgr.5.1.55-60

Authors

Prit Devendrakumar Shah Mechanical Engineering, GCET, Vallabh Vidyanagar, India
Ajay Patel Mechanical Engineering, GCET, Vallabh Vidyanagar, India
Manan Desai Mechanical Engineering, GCET, Vallabh Vidyanagar, India

DOI:

https://doi.org/10.21467/ajgr.5.1.55-60

Abstract

This paper describes the hardware of movable Headlight & Foglight system for vehicles. It has been found that the majority of accidents take place due to the invisibility of road at night & in fog. So, it becomes necessary that we get a clear vision during the night & in fog so as to avoid accidents. Therefore, the following research represents the rotation of headlight & foglight with the rotation of wheels. In this system used rack & pinion arrangement which give the drive to the optical axes on which headlight & foglight are mounted so when the links are moved with steering arm that gives predefined motion to headlight and foglight. Hence the light from the Headlight & Foglight focuses properly on the road, also while taking turn the driver coming from the opposite side can easily notice the upcoming vehicle & so the number of accidents is minimized. In this paper, we have defined a novel approach movement of foglight along with the headlight.

Keywords:

Automotive Headlight system, automotive foglight system, Mechanism, Design

Downloads

Download data is not yet available.

References

Weifeng Wang, Qing Wu, “Control Model and Simulation for Adaptive Front light System of Vehicle on Curve Roads” 2008 IEEE Vehicle Power and Propulsion Conference, 2010.

Shreyas S; Kirthanaa Raghuraman, "Adaptive Headlight System for accident prevention", 2014 International Conference on Recent Trends in Information Technology.

Fengqun Guo, Hui Xiao; Shouzhi Tang, “Research of Modeling and Simulation on Adaptive Front-Lighting System for Corner Based on CCD” 25th Chinese Control and Decision Conference (CCDC) IEEE, (2013).

J.B. Jiang, C.F. Cheung, S, “Design and fabrication of freeform reflector for automotive headlamp” 2nd International Conference on Power Electronics Systems and Applications: Hong Kong, p: 220-224, 12-14 November (2006).

Vaishali D.Todkar, Mrs.M.R.Bachute, "Adaptive Front Light System", International Journal of Advanced Research (2016), Volume 4, Issue 5, pp:907-913.

Guo Dong ; Wang Hongpei ; et al, "Study on adaptive front-lighting system of automobile based on microcontroller", Proceedings 2011 International Conference on Transportation, Mechanical, and Electrical Engineering (TMEE).

Manish Bonde; Kushal Sakure; et al, "Adaptive Front Light System Using ARM", International Journal of Informative & Futuristic Research (IJIFR), Volume 2, Issue 7, pp: 2296- 2302.

Sneh Parhad, “Development of Automotive Adaptive Front Lighting System,” Proceedings of IRF International Conference, ISBN: 978-93-82702-56-6, 5th & 6th February (2014), Pune India

Jitender Malik; Kanika Booria, "Design of mechanical components of Steering controlled headlights". Project Report

Singh, P., Taneja, N., Sharma, A., and Gaurav, A., "Development of an Adaptive Steering Controlled Headlight for Low Cost Vehicles," SAE Technical Paper 2016-28-0174, 2016.

Gadhave Yogesh V; Jadhav Chakradhar R; et al "Front Wheel Steering System with Movable Headlights" Vol-3 Issue-2. IJARIIE-ISSN(O)-2395-4396, 2017.

Ajay R. Pawar; Shivraj S. Salekar; et al, "Design and Fabrication of Movable Headlight System". International Journal of Advance Engineering and Research Development, Volume 4, Issue 5, May -2017.

Manisha V Makwana; Akshay Shah; et al, “Design and Manufacture of Movable Headlight System in Automobile”, International Journal of Innovative and Emerging Research in Engineering, vol 1, issue 2, pp 12-16, February 2014.