Performance and Prospects of Severe Plastic Deformation for Effective Biomedical Titanium Alloys


  • Wambura Mwiryenyi Mwita Department of Mechanical Engineering Science, University of Johannesburg
  • Esther Titilayo Akinlabi Department of Mechanical Engineering Science, University of Johannesburg
  • Kazeem Oladele Sanusi Department of Mechanical Engineering Science, University of Johannesburg



Application of severe plastic deformation (SPD) technology to process effective biomedical titanium alloys has shown promising results at laboratory scale. However, more research is still required before adopting this technology from laboratory scale to industrial scale production. This review presents performance and prospects of SPD for effective ultra-fine/nanograin structure-biomedical titanium alloys. Effective biomedical titanium alloys should have desired properties for the medical application. The properties include; high static and fatigue strengths, surface hardness for wear resistance, good ductility, corrosion resistance and biocompatibility. Based on current works reported in the literature, the review focused on; high-pressure torsion (HPT), equal channel angular pressing (ECAP), asymmetric rolling (AR), accumulative roll bonding (ARB) and repetitive corrugation and straightening (RCS). Overview of biomedical application of titanium alloys and desired material properties is presented. A detail discussion on the working principle, performance (e.g. induced strength, hardness, grain size and texture etc.) and material deformation homogeneity of each SPD method are presented. Also, prospects and challenges of each SPD method to be implemented at industrial scale for continuous and mass production are highlighted. The review concludes with the effectiveness of SPD processes, characteristics of processed samples and suggestion of future work for SPD to process effective biomedical titanium alloys at industrial scale.


Accumulative roll bonding, asymmetric rolling, biocompatibility, biomedical alloy, equal channel angle pressing, high pressure torsion, repetitive corrugation and straightening, severe plastic deformation, strain homogeneity


Download data is not yet available.


<p>[1]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A. V. Polyakov, I. P. Semenova, and R. Z. Valiev, “High fatigue strength and enhanced biocompatibility of UFG CP Ti for medical innovative applications,” <em>IOP Conf. Ser. Mater. Sci. Eng.</em>, vol. 63, pp. 1–6, Aug. 2014. <a href="">View</a></p>
<p>[2]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; G. Lütjering and J. C. Williams, <em>Titanium : Engineering Materials and Processes</em>, Second Edi. New York: Springer Berlin Heidelberg, 2007. <a href="">View</a></p>
<p>[3]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D. J. Fernandes, C. N. Elias, and R. Z. Valiev, “Properties and Performance of Ultrafine Grained Titanium for Biomedical Applications,” <em>Mater. Res.</em>, vol. 18, no. 6, pp. 1163–1175, Nov. 2015. <a href="">View</a></p>
<p>[4]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Niinomi, Y. Liu, M. Nakai, H. Liu, and H. Li, “Biomedical titanium alloys with Young’s moduli close to that of cortical bone,” <em>Regen. Biomater.</em>, vol. 3, no. 3, pp. 173–185, Sep. 2016. <a href="">View</a></p>
<p>[5]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; C. Oldani and A. Dominguez, “Titanium as a Biomaterial for Implants,” in <em>Recent Advances in Arthroplasty</em>, S. K. Fokter, Ed. InTechOpen, 2012, pp. 150–162. <a href="">View</a></p>
<p>[6]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; H. Hermawan, D. Ramdan, and J. Djuansjah, “Metals for Biomedical Applications,” in <em>Biomedical Engineering from Theory to Applications</em>, R. Fazel, Ed. InTechOpen, 2011, pp. 412–440. <a href="">View</a></p>
<p>[7]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Niinomi, “Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti-29Nb-13Ta-4.6Zr,” <em>Biomaterials</em>, vol. 24, no. 16, pp. 2673–2683, Jul. 2003. <a href="">View</a></p>
<p>[8]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; X. Zhao, Y. Xirong, X. Liu, C. Wang, Y. Huang, and T. G. Langdon, “Processing of commercial purity titanium by ECAP using a 90 degrees die at room temperature,” <em>Mater. Sci. Eng. A</em>, vol. 607, pp. 482–489, Jun. 2014. <a href="">View</a></p>
<p>[9]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; S. J. Li, M. Niinomi, T. Akahori, T. Kasuga, R. Yang, and Y. L. Hao, “Fatigue characteristics of bioactive glass-ceramic-coated Ti-29Nb-13Ta-4.6Zr for biomedical application,” <em>Biomaterials</em>, vol. 25, no. 17, pp. 3369–3378, Sep. 2004. <a href="">View</a></p>
<p>[10]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; C. N. Elias, M. A. Meyers, R. Z. Valiev, and S. N. Monteiro, “Ultrafine grained titanium for biomedical applications: An overview of performance,” <em>J. Mater. Res. Technol.</em>, vol. 2, no. 4, pp. 340–350, Nov. 2013. <a href="">View</a></p>
<p>[11]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Y. Kirmanidou <em>et al.</em>, “New Ti-Alloys and Surface Modifications to Improve the Mechanical Properties and the Biological Response to Orthopedic and Dental Implants: A Review,” <em>Biomed Res. Int.</em>, vol. 2016, pp. 1–22, Jan. 2016. <a href="">View</a></p>
<p>[12]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A. Fattah-alhosseini, A. Reza, Y. Mazaheri, and M. Karimi, “An Investigation of mechanical properties in accumulative roll bonded nano-grained pure titanium,” <em>Mater. Sci. Eng. A</em>, vol. 688, pp. 218–224, Mar. 2017. <a href="">View</a></p>
<p>[13]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; X. Zhang and H. Sehitoglu, “Crystallography of the B2 → R → B19′ phase transformations in NiTi,” <em>Mater. Sci. Eng. A</em>, vol. 374, pp. 292–302, Jun. 2004. <a href="">View</a></p>
<p>[14]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; L. Petrini and F. Migliavacca, “Biomedical Applications of Shape Memory Alloys,” <em>J. Metall.</em>, vol. 2011, pp. 1–15, Jun. 2011. <a href="">View</a></p>
<p>[15]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; J. Il Kim, H. Y. Kim, H. Hosoda, and S. Miyazaki, “Shape Memory Behavior of Ti – 22Nb –( 0 . 5 – 2 . 0 ) O ( at {%}) Biomedical Alloys,” <em>Mater. Trans.</em>, vol. 46, no. 4, pp. 852–857, Apr. 2005. <a href="">View</a></p>
<p>[16]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; L. Mishnaevsky <em>et al.</em>, “Nanostructured titanium-based materials for medical implants: Modeling and development,” <em>Mater. Sci. Eng. R Reports</em>, vol. 81, no. 1, pp. 1–19, Jul. 2014. <a href="">View</a></p>
<p>[17]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. T. Mohammed, “Mechanical and wear properties of HPT-biomedical titanium: A review,” <em>Biomater. Biomech. Bioeng.</em>, vol. 2, no. 3, pp. 185–196, Nov. 2015. <a href="">View</a></p>
<p>[18]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; S. Bagherifard, R. Ghelichi, A. Khademhosseini, and M. Guagliano, “Cell response to nanocrystallized metallic substrates obtained through severe plastic deformation,” <em>ACS Appl. Mater. Interfaces</em>, vol. 6, no. 11, pp. 7963–7985, Apr. 2014. <a href="">View</a></p>
<p>[19]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Krystian, K. Bryła, J. Horky, and B. Mingler, “Equal Channel Angular Pressing (ECAP) of hollow profiles made of titanium,” <em>IOP Conf. Ser. Mater. Sci. Eng.</em>, vol. 194, no. 1, pp. 1–6, Jul. 2017. <a href="">View</a></p>
<p>[20]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Niinomi, “Enhancement of mechanical biocompatibility of titanium alloys by deformation-induced transformation,” <em>Mater. Sci. Forum</em>, vol. 879, pp. 125–130, 2017. <a href="">View</a></p>
<p>[21]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; R. Z. Valiev, R. K. Islamgaliev, and I. V. Alexandrov, “Bulk nanostructured materials from severe plastic deformation,” <em>Prog. Mater. Sci.</em>, vol. 45, no. 2, pp. 103–189, Jan. 2000. <a href="">View</a></p>
<p>[22]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Y. Estrin and A. Vinogradov, “Extreme grain refinement by severe plastic deformation: A wealth of challenging science,” <em>Acta Mater.</em>, vol. 61, no. 3, pp. 782–817, Feb. 2013. <a href="">View</a></p>
<p>[23]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; C. T. Wang, N. Gao, M. G. Gee, R. J. K. Wood, and T. G. Langdon, “Tribology testing of ultrafine-grained Ti processed by high-pressure torsion with subsequent coating,” <em>J. Mater. Sci.</em>, vol. 48, no. 13, pp. 4742–4748, Jul. 2013. <a href="">View</a></p>
<p>[24]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; H. Shahmir, M. Nili-Ahmadabadi, Y. Huang, and T. G. Langdon, “Evolution of microstructure and hardness in NiTi shape memory alloys processed by high-pressure torsion,” <em>J. Mater. Sci.</em>, vol. 49, no. 8, pp. 2998–3009, Jan. 2014. <a href="">View</a></p>
<p>[25]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; N. Lugo, N. Llorca, J. M. Cabrera, and Z. Horita, “Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion,” <em>Mater. Sci. Eng. A</em>, vol. 477, no. 1–2, pp. 366–371, Mar. 2008. <a href="">View</a></p>
<p>[26]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. T. M. Shahir Hussain, “Mechanical Properties of ECAP-Biomedical Titanium Materials: A Review,” <em>Int. J. Innov. Res. Sci. Eng. Technol.</em>, vol. 4, no. 5, pp. 2700–2704, May 2015. <a href="">View</a></p>
<p>[27]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Y. Todaka, M. Umemoto, A. Yamazaki, J. Sasaki, and K. Tsuchiya, “Effect of Strain Path in High-Pressure Torsion Process on Hardening in Commercial Purity Titanium,” <em>Mater. Trans.</em>, vol. 49, no. 1, pp. 47–53, Dec. 2008. <a href="">View</a></p>
<p>[28]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Nakai, M. Niinomi, J. Hieda, H. Yilmazer, and Y. Todaka, “Heterogeneous grain refinement of biomedical Ti-29Nb-13Ta-4.6Zr alloy through high-pressure torsion,” <em>Sci. Iran.</em>, vol. 20, no. 3, pp. 1067–1070, 2013. <a href="">View</a></p>
<p>[29]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Farvizi, M. R. Akbarpour, E. Y. Yoon, and H. S. Kim, “Effect of high-pressure torsion on the microstructure and wear behavior of NiTi alloy,” <em>Met. Mater. Int.</em>, vol. 21, no. 5, pp. 891–896, 2015. <a href="">View</a></p>
<p>[30]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; K. Edalati, S. Lee, and Z. Horita, “Continuous high-pressure torsion using wires,” <em>J. Mater. Sci.</em>, vol. 47, no. 1, pp. 473–478, Jan. 2012. <a href="">View</a></p>
<p>[31]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Y. Huang, S. Mortier, P. H. R. Pereira, P. Bazarnik, M. Lewandowska, and T. G. Langdon, “Thermal stability and mechanical properties of HPT-processed CP-Ti,” <em>IOP Conf. Ser. Mater. Sci. Eng.</em>, vol. 194, pp. 1–6, May 2017. <a href="">View</a></p>
<p>[32]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Ashida, P. Chen, H. Doi, Y. Tsutsumi, T. Hanawa, and Z. Horita, “Microstructures and mechanical properties of Ti-6Al-7Nb processed by high-pressure torsion,” <em>Procedia Eng.</em>, vol. 81, no. October, pp. 1523–1528, Oct. 2014. <a href="">View</a></p>
<p>[33]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; B. Z. Jiang, S. Emura, and K. Tsuchiya, “Microstructures and mechanical properties of Ti5553 alloy processed by high-pressure torsion,” <em>IOP Conf. Ser. Mater. Sci. Eng.</em>, vol. 63, no. 1, pp. 1–8, Aug. 2014. <a href="">View</a></p>
<p>[34]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; K. Sharman <em>et al.</em>, “Enhancement in mechanical properties of a β-titanium alloy by high-pressure torsion,” <em>J. Mater. Res. Technol.</em>, vol. 4, no. 1, pp. 79–83, Nov. 2015. <a href="">View</a></p>
<p>[35]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Nie, C. T. Wang, M. Qu, N. Gao, J. A. Wharton, and T. G. Langdon, “The corrosion behaviour of commercial purity titanium processed by high-pressure torsion,” <em>J. Mater. Sci.</em>, vol. 49, no. 7, pp. 2824–2831, Apr. 2014. <a href="">View</a></p>
<p>[36]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; C. T. Wang, A. G. Fox, and T. G. Langdon, “An Investigation of Hardness Homogeneity and Microstructure in Pure Titanium Processed by High Pressure Torsion,” <em>Mater. Sci. Forum</em>, vol. 783–786, pp. 2701–2706, May 2014. <a href="">View</a></p>
<p>[37]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; H. Shahmir, M. Nili-Ahmadabadi, Y. Huang, J. Myun Jung, H. Seop Kim, and T. G. Langdon, “Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion,” <em>Mater. Sci. Eng. A</em>, vol. 626, pp. 203–206, Feb. 2015. <a href="">View</a></p>
<p>[38]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A. Hohenwarter, “Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper,” <em>Mater. Sci. Eng. A</em>, vol. 626, pp. 80–85, Mar. 2015. <a href="">View</a></p>
<p>[39]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; V. M. Segal, “Materials processing by simple shear,” <em>Mater. Sci. Eng. A</em>, vol. 197, no. 1995, pp. 157–164, Jul. 1995. <a href="">View</a></p>
<p>[40]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; F. Djavanroodi, B. Omranpour, M. Ebrahimi, and M. Sedighi, “Designing of ECAP parameters based on strain distribution uniformity,” <em>Prog. Nat. Sci. Mater. Int.</em>, vol. 22, no. 5, pp. 452–460, Oct. 2012. <a href="">View</a></p>
<p>[41]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Y. Gu, A. Ma, J. Jiang, Y. Yuan, and H. Li, “Deformation structure and mechanical properties of pure titanium produced by rotary-die equal-channel angular pressing,” <em>Metals (Basel).</em>, vol. 7, no. 297, pp. 1–10, Aug. 2017. <a href="">View</a></p>
<p>[42]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; K. Ivanov, “Comparative TEM study of microstructures of Ti-6Al-4V alloy processed by equal channel angular pressing and helical plus groove rolling,” <em>Int. Conf. Adv. Mater. with Hierarchical Struct. New Technol. Reliab. Struct.</em>, vol. 1783, Nov. 2016. <a href="">View</a></p>
<p>[43]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Gzyl, A. Rosochowski, S. Boczkal, L. Olejnik, and M. N. Katimon, “Producing High-Strength Metals by I-ECAP,” <em>Adv. Eng. Mater.</em>, vol. 18, no. 2, pp. 219–223, May 2016. <a href="">View</a></p>
<p>[44]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; E. Prokofyev, D. Gunderov, S. Prokoshkin, and R. Valiev, “Microstructure, mechanical and functional properties of NiTi alloys processed by ECAP technique,” <em>ESOMAT 2009 - 8th Eur. Symp. Martensitic Transform.</em>, vol. 6028, pp. 0–4, Sep. 2009. <a href="">View</a></p>
<p>[45]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D. T. Zhang <em>et al.</em>, “Effect of annealing temperature on martensitic transformation of Ti49.2Ni50.8alloy processed by equal channel angular pressing,” <em>Trans. Nonferrous Met. Soc. China (English Ed.</em>, vol. 26, no. 2, pp. 448–455, Feb. 2016. <a href="">View</a></p>
<p>[46]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; B. Kockar, I. Karaman, J. I. Kim, and Y. Chumlyakov, “A method to enhance cyclic reversibility of NiTiHf high temperature shape memory alloys,” <em>Scr. Mater.</em>, vol. 54, no. 12, pp. 2203–2208, Jun. 2006. <a href="">View</a></p>
<p>[47]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; H. Shahmir, M. Nili-Ahmadabadi, and T. G. Langdon, “Shape memory effect of NiTi alloy processed by equal-channel angular pressing followed by post deformation annealing,” <em>IOP Conf. Ser. Mater. Sci. Eng.</em>, vol. 63, no. 1, pp. 1–9, 2014. <a href="">View</a></p>
<p>[48]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. J. Qarni, G. Sivaswamy, A. Rosochowski, and S. Boczkal, “Effect of incremental equal channel angular pressing (I-ECAP) on the microstructural characteristics and mechanical behaviour of commercially pure titanium,” <em>Mater. Des.</em>, vol. 122, pp. 385–402, May 2017. <a href="">View</a></p>
<p>[49]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A. A. Mendes Filho, C. A. Rovere, S. E. Kuri, V. L. Sordi, and M. Ferrante, “A general study of commercially pure Ti subjected to severe plastic deformation: Microstructure, strength and corrosion resistance,” <em>Rev. Mater.</em>, vol. 15, no. 2, pp. 254–259, 2010. <a href="">View</a></p>
<p>[50]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; W. Polkowski, “Differential Speed Rolling : A New Method for a Fabrication of Metallic Sheets with Enhanced Mechanical Properties,” in <em>Progress in Metallic Alloys</em>, V. Glebovsky, Ed. InTechOpen, 2016, pp. 111–126. <a href="">View</a></p>
<p>[51]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; R. Roumina and C. W. Sinclair, “Deformation geometry and through-thickness strain gradients in asymmetric rolling,” <em>Metall. Mater. Trans. A Phys. Metall. Mater. Sci.</em>, vol. 39, no. 10, pp. 1–9, Oct. 2008. <a href="">View</a></p>
<p>[52]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; B. Hai, L. Yu, C. Lu, A. K. Tieu, H. J. Li, and A. Godbole, “Special Rolling Techniques for Improvement of Mechanical Properties of Ultra fine-Grained Metal Sheets : a Review,” <em>Adv. Eng. Mater.</em>, vol. 18, no. 5, pp. 754–769, May 2016. <a href="">View</a></p>
<p>[53]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D. Tang, X. Liu, M. Song, and H. Yu, “Experimental and Theoretical Study on Minimum Achievable Foil Thickness during Asymmetric Rolling,” <em>PLoS One</em>, vol. 9, no. 9, Sep. 2014. <a href="">View</a></p>
<p>[54]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; W. J. Kim, S. J. Yoo, and J. B. Lee, “Microstructure and mechanical properties of pure Ti processed by high-ratio differential speed rolling at room temperature,” <em>Scr. Mater.</em>, vol. 62, no. 7, pp. 451–454, Apr. 2010. <a href="">View</a></p>
<p>[55]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Q. Chao, P. D. Hodgson, and H. Beladi, “Microstructure and Texture Evolution During Symmetric and Asymmetric Rolling of Martensitic Ti-6Al-4V alloy.,” <em>Metall. Mater. Trans. A</em>, vol. 47, no. 1, pp. 531–545, Jan. 2016. <a href="">View</a></p>
<p>[56]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Z. Li, A. Shan, and J. Jiang, “Improved Mechanical Properties of Nano-grained Ti Processed by Combination of Asymmetric and Symmetric Rolling.,” in <em>Shanghai International Nanotechnology Cooperation Symposium</em>, 2012, pp. 146–150. <a href="">View</a></p>
<p>[57]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; N. Tsuji, Y. Saito, S. H. Lee, and Y. Minamino, “ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials,” <em>Adv. Eng. Mater.</em>, vol. 5, no. 5, pp. 338–344, Feb. 2003. <a href="">View</a></p>
<p>[58]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; N. Tsuji, Y. Saito, H. Utsunomiya, and S. Tanigawa, “Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process,” <em>Scr. Mater.</em>, vol. 40, no. 7, pp. 795–800, Mar. 1999. <a href="">View</a></p>
<p>[59]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; H. Sheikh and E. Paimozd, “Effect of Hot Accumulative Roll Bonding Process on the Mechanical Properties of AA5083,” <em>Open J. Met.</em>, vol. 1, pp. 12–15, Sep. 2011. <a href="">View</a></p>
<p>[60]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; H. Kitahara <em>et al.</em>, “Fatigue Crack Propagation Behavior in Commercial Purity Ti Severely Deformed by Accumulative Roll Bonding Process,” <em>Mater. Trans.</em>, vol. 49, no. 1, pp. 64–68, Jan. 2008. <a href="">View</a></p>
<p>[61]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; G. Fan, Y. Du, T. Yu, N. Hansen, L. Geng, and X. Huang, “Laminated Ti-Al composites : Processing , structure and strength,” <em>Mater. Sci. Eng. A</em>, vol. 673, pp. 572–580, Jul. 2016. <a href="">View</a></p>
<p>[62]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; P. M. Bhovi and K. Venkateswarlu, “Influence of RCS on Al-3Mg and Al-3Mg-0.25Sc alloys,” <em>IOP Conf. Ser. Mater. Sci. Eng.</em>, vol. 114, no. 1, pp. 1–7, 2016. <a href="">View</a></p>
<p>[63]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. Moradpour, F. Khodabakhshi, and H. Eskandari, “Microstructure–mechanical property relationship in an Al–Mg alloy processed by constrained groove pressing-cross route,” <em>Mater. Sci. Technol.</em>, pp. 1–15, Jan. 2018. <a href="">View</a></p>
<p>[64]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; J. Huang, Y. Zhu, D. Alexander, X. Liao, T. Lowe, and R. Asaro, “Development of repetitive corrugation and straightening,” <em>Mater. Sci. Eng. A</em>, vol. 371, no. 1, pp. 35–35, Apr. 2004. <a href="">View</a></p>
<p>[65]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; N. Thangapandian, S. Balasivanandha Prabu, and K. A. Padmanabhan, “Effects of die profile on grain refinement in Al-Mg alloy processed by repetitive corrugation and straightening,” <em>Mater. Sci. Eng. A</em>, vol. 649, pp. 229–238, Sep. 2016. <a href="">View</a></p>
<p>[66]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; M. S. Ghazani and A. Vajd, “Finite Element Analysis of the Groove Pressing of Aluminum Alloy,” <em>Model. Numer. Simul. Mater. Sci.</em>, vol. 4, pp. 32–36, Jan. 2014. <a href="">View</a></p>
<p>[67]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D. H. Shin, J. J. Park, Y. S. Kim, and K. T. Park, “Constrained groove pressing and its application to grain refinement of aluminum,” <em>Mater. Sci. Eng. A</em>, vol. 328, no. 1, pp. 98–103, May 2002. <a href="">View</a></p>
<p>[68]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; G. V. P. Kumar, G. G. Niranjan, and U. Chakkingal, “Grain Refinement in Commercial Purity Titanium Sheets by Constrained Groove Pressing,” <em>Mater. Sci. Forum</em>, vol. 683, pp. 233–242, May 2011. <a href="">View</a></p>
<p>[69]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; S. Fong, A. Danno, M. J. Tan, and B. Wah Chua, “Effect of Deformation and Temperature Paths in Severe Plastic Deformation Using Groove Pressing on Microstructure, Texture, and Mechanical Properties of AZ31-O,” <em>J. Manuf. Sci. Eng.</em>, vol. 137, no. 5, pp. 16–26, Feb. 2015. <a href="">View</a></p>
<p>[70]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A. Thirugnanam, T. S. Sampath Kumar, and U. Chakkingal, “Tailoring the bioactivity of commercially pure titanium by grain refinement using groove pressing,” <em>Mater. Sci. Eng. C</em>, vol. 30, no. 1, pp. 203–208, 2010. <a href="">View</a></p>
<p>[71]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; F. Khodabakhshi, M. Abbaszadeh, S. R. Mohebpour, and H. Eskandari, “3D finite element analysis and experimental validation of constrained groove pressing-cross route as an SPD process for sheet form metals,” <em>Int. J. Adv. Manuf. Technol.</em>, vol. 73, no. 9–12, pp. 1291–1305, May 2014. <a href="">View</a></p>
<p>[72]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; N. Thangapandian and S. B. Prabu, “The Role of Corrugation Die Parameters on the Mechanical Properties of Aluminum Alloy (AA 5083) Processed by Repetitive Corrugation and Straightening,” <em>J. Mater. Sci. Chem. Eng.</em>, vol. 3, no. 7, pp. 208–212, 2015. <a href="">View</a></p>






Review Article

How to Cite

W. M. Mwita, E. T. Akinlabi, and K. O. Sanusi, “Performance and Prospects of Severe Plastic Deformation for Effective Biomedical Titanium Alloys”, J. Mod. Mater., vol. 5, no. 1, pp. 8–23, Feb. 2018.